Hydro Guide Bearing Workshop provides interactive forum with O&M experts

Thrust and guide bearings will take center stage during a special half-day workshop taking place at HydroVision International 2018.

This session, hosted by Pioneer Motor Bearing Co., brings together a panel of fluid film bearing specialists who will share their expertise in the analysis, design, application, installation and maintenance of bearings in a non-commercial roundtable format.

Appearing on the panel are:

  • Dr. Lyle A. Branagan, P.E., Engineering Manager, Pioneer Motor Bearing Co., since 1996. Dr. Branagan has performed advanced research on temperature gradients in fixed geometry and tilting pad bearings. For a decade, he served Pacific Gas & Electric Co. as a rotordynamics engineer, gaining substantial design and operations experience with bearings and vibration in hydroelectric, fossil, geothermal and nuclear power stations. He was an integral member of the start-up team for PG&E’s Helms Pump Storage Generating Station. Dr. Branagan has published numerous articles and papers and lectured extensively for the Electric Power Research Institute, in addition to conducting training sessions for engineers at electric utilities.
  • Marcus Crahan, P.E., More than 30-years of experience as an engineering consultant specializing in the failure analysis and performance testing of large rotating machinery. Globally recognized expert in the performance of root cause investigations of capital equipment failures, especially the hydroelectric industry. Vastly knowledgeable on the subjects and intricacies electrical machinery, including their design, manufacturing, operation and maintenance processes. Provides litigation support and expert witness testimony pertaining to the design, manufacturing, installation, operations and maintenance of large electro-mechanical machinery.
  • Dr. Chris Ettles, Professor Emeritus, Rensselaer Polytechnic Institute, Troy, N.Y. Dr. Ettles is a noted expert on tilting pad thrust bearings. Over a span of two decades he created and refined GENMAT, the only software code that makes it possible to perform a thorough analysis of spring bed- supported thrust bearings. Dr. Ettles has been a consultant to such leading companies as General Electric (Canada) and Voith Hydro (Germany).
  • David “Day” Griffin, M.S.M.E, P.E., Field Service Engineer, Pioneer Motor Bearing Co., since 2010. After working as Pioneer’s Service Engineer for 3 years, he received a full scholarship to to the University of Virginia to attain his Masters of Science in Mechanical Engineering while performing research at the University of Virginia’s ROMAC (Rotating Machinery and Controls) Laboratory. His masters research focused on rotordynamics and the effects of circumferential scratching in fluid film bearings. Day returned to Pioneer in October of 2016 and has since been developing Pioneer’s Fluid Pivot journal bearing test rig. Day specializes in the design of GE spring-bed thrust bearing upgrades.

The Hydro Guide Bearing Workshop takes place 8 a.m. – noon on Tuesday, June 26th. Registration is required. To sign up to attend, visit HydroEvent.com.

HydroVision International is the world’s largest event dedicated to all aspects of the conventional and marine hydrokinetic sector. This year’s conference and exhibition takes place June 26-28 at the Charlotte Convention Center in Charlotte, N.C.

Pioneer Bearing, headquartered near Charlotte, recently entered into a license agreement with the Zollern Group’s Plain Bearing Technology Division, allowing Pioneer to provide technical services to North American end-users of Zollern products.

Previous articlePerspectives: Bringing You the World
Next articleFERC releases draft environmental impact statement for 361.9-MW Yuba River relicensing

No posts to display